Procedure
Step 1
Enable Quiet Mode in the BIOS policy of the server
’
s Service Profile.
Step 2
Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the front panel using
a KVM dongle (N20-BKVM) or by other means.
Step 3
Reboot the server.
Step 4
Press
F2
during reboot to enter the BIOS setup screens.
Step 5
On the Advanced tab, select
Trusted Computing
and press
Enter
.
Step 6
Set the TPM Support option to
Enable
.
Step 7
Press
F10
to save and exit. Allow the server to finish booting.
Server Troubleshooting
For general troubleshooting information, see the see the
Cisco UCS Manager B-Series Troubleshooting Guide
.
Server Configuration
Cisco UCS blade servers are intended to be configured and managed using Cisco UCS Manager. For details, see the
Configuration
Guide
for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:
http:/
/www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Physical Specifications for the Cisco UCS B200 M3
Value
Specification
1.95 inches (50 mm)
Height
8.00 inches (203 mm)
Width
24.4 inches (620 mm)
Depth
15.0 lbs (6.8 kg)
The system weight listed here is an estimate for a fully
configured system and will vary depending on peripheral
devices installed.
Weight
Related Documentation
The documentation set for the Cisco Unified Computing System environment is described in full at:
31
