
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router
About Troubleshooting the Cisco uBR10-SRP-OC12SML DPT WAN Line Card
21
Cisco uBR10-SRP-OC12SML DPT WAN Line Card
78-13602-01
About Troubleshooting the Cisco uBR10-SRP-OC12SML DPT
WAN Line Card
Check the following items if a problem appears on one of the OC12SML DPT WAN line cards.
Step 1
Verify that the card is securely seated in the chassis
•
Remove the line card and reinsert it, making sure that it firmly connects to the backplane and that
both captive screws are tightly connected.
•
While the card is out of the chassis, check for bent pins on the backplane.
–
If there are bent pins, contact TAC for instructions.
Step 2
Verify that the PRE modules are operating properly.
•
The Status LED is on (green).
•
The Fail LED is off.
•
No Alarm LED’s are on (yellow).
Step 3
If both PREs are operating correctly, check the Power LEDs on each uBR10-SRP- OC12SML DPT WAN
line card. Are the Power LEDs on each line card on (green)?
•
If no, remove the line card and reinsert it, making sure that it firmly connects to the backplane and
that both captive screws are tightly connected.
•
If yes, proceed to the next step.
Step 4
Is the STATUS LED on the Cisco uBR10-SRP- OC12SML DPT WAN line card is on?
•
If no, check that the version of Cisco IOS you have loaded on the router supports the
Cisco uBR10-SRP- OC12SML DPT WAN line card.