Cisco TelePresence Movi 4.1 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 29

Cisco TelePresence Movi 4.1 Скачать руководство пользователя страница 13

Deploying and upgrading the client

Cisco TelePresence Movi Administrator Guide (4.1)

Page 13 of 29

Note:

For more on managing provisioning templates, see the Provisioning deployment guide.

Provisioning options

The "Default" column in the table below describes how Movi behaves if no specific provisioning
information is configured.

Note:

Some settings are only available in TMS 12.6 or later, after uploading the

MoviProvisioningConfigTemplate.xml file, as described above. See the “Description” column.

Field

Default

Description

ClearPath

Off

ClearPath is a Cisco TelePresence solution that minimizes
the negative effects of packet loss in a non-optimal network.
Among the mechanisms used are H.264-specific error
recovery techniques, feedback from decoders and forward
error correction (FEC).
Both call participants must support ClearPath for it to take
effect.

This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.

Default Mediatype
Candidate

Host

The address to use before ICE has completed, if ICE fails or
if the remote side does not understand ICE. The available
options are:

n

Host

n

Rflx

n

Relay

Relay is the recommended setting if changing the default.
This is typically needed when Movi is deployed in
environments where most other endpoints do not
understand ICE. See the Enabling ICE section.

This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.

Enable Far End
Camera Control

On

This setting lets Movi control far end cameras, when allowed
by the far end.

This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.

Enable ICE

Off

Interactive Connectivity Establishment (ICE) dynamically
discovers the best possible path for media to travel between
call participants.

See the Enabling ICE section for more information on what
is required to enable this setting.

This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.

«
...
11
12
13
14
15
...
»

Содержание TelePresence Movi 4.1






























Отзывы:

Нет отзывов