Configure the appliance's IP address and management
information:
You configure your appliance's eth0 management IP address and related information in
First Time Setup. For most appliances, this is the first configuration in First Time Setup.
Before You Begin
l
If you are configuring a Data Node, go to
l
If you are configuring a Data Store-compatible SMC or Flow Collector, go to
Store-Compatible Appliances (SMC 2210, FC 4210)
l
If you are configuring any other Stealthwatch appliance, start with step 1.
Procedure
1.
Log in to the System Configuration program:
l
If you are configuring a Data Node or Data Store-compatible appliance, type
root
, and then press
Enter
. If you are configuring any other appliance, type
sysadmin
, and then press
Enter
.
root
permissions are required to properly configure the Data Store
and Data Store compatibility.
l
When the password prompt appears, type
lan1cope
, and then press
Enter
.
l
At the next prompt, type
SystemConfig
, and then press
Enter
.
2.
If this is the first time you entered System Configuration on this appliance, First
Time Setup starts.
Otherwise, the System Configuration menu opens. Select
Management
, and
then press
Enter
.
3.
Enter an
IP address
for this appliance.
4.
Enter a
Netmask
for the network.
5.
Enter a
Gateway
address for this appliance's IP address.
6.
Enter a
Broadcast
address for the appliance.
7.
Enter a
Hostname
for your appliance.
8.
Enter a
Domain
for your appliance.
9.
Select
Select
, then select
Yes
to confirm your entries.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- 73 -
Appendix B. Stealthwatch Hardware Installation
