C H A P T E R
2-1
Administration Guide for Cisco Unified MeetingPlace SMTP E-Mail Gateway Release 5.4
OL-11018-01
2
Installing Cisco Unified MeetingPlace SMTP
E-Mail Gateway
This chapter describes how to install Cisco Unified MeetingPlace SMTP E-Mail Gateway.
See the following sections:
•
Preparing for the Installation, page 2-1
•
Installing the Cisco Unified MeetingPlace Gateway SIM, page 2-2
•
Installing Cisco Unified MeetingPlace SMTP E-Mail Gateway, page 2-3
•
Verifying the Cisco Unified MeetingPlace SMTP E-Mail Gateway Installation, page 2-5
•
Stopping and Restarting the Cisco Unified MeetingPlace SMTP E-Mail Gateway, page 2-5
•
Uninstalling Cisco Unified MeetingPlace SMTP E-Mail Gateway, page 2-6
Preparing for the Installation
To prepare for the Cisco Unified MeetingPlace SMTP E-Mail Gateway installation, complete the
following tasks:
•
Verify that you have the supported system requirements by reviewing the
System Requirements for
Cisco Unified MeetingPlace
, at
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html
.
•
Fill in
Table 2-1
so you have all of the information needed to complete the installation.
•
If applicable, uninstall the current release of Cisco Unified MeetingPlace SMTP E-Mail Gateway
by doing the procedure in the
“Uninstalling Cisco Unified MeetingPlace SMTP E-Mail Gateway”
section on page 2-6
.
Note
If you have customized notification templates, we recommend that you save those templates in a
different file or using a different extension before you install this software. This installation can
overwrite your current templates with new templates that include features that are new in this software.
You can use the templates that you save to customize the new templates. See the
“Accessing Notification
Templates” section on page 4-2
for information about how to access the current notification templates.