Cisco Small Business RV320, Руководство администратора

Страница: 92 / 122

VPN
Client to Gateway
92 Cisco RV320/RV325 Administration Guide
8
- Version 4.9 supports Mac OS X 10.4 and 10.5
- Version 4.8 supports Intel based Linux
To set it up Easy VPN, configure a group password on this page, and add a
username and password for each Cisco VPN Client users in the User
Management Table in the
User Management section. When adding a user,
the Unassigned group should be selected. The other groups are used for
SSL VPN.
Configure Tunnel or Group VPN
Enter the following information:
• Tunnel Name— Name to describe the tunnel. For a single user, you can enter
the username or location. For a group VPN, you could identify the group
business role or location. This description is for your reference and does not
have to match the name used at the other end of the tunnel.
• Interface— WAN port.
• Keying Mode— Choose the key management method:
- Manual— Generate the key yourself, but do not enable key negotiation.
Manual key management is used in small static environments or for
troubleshooting purposes. Enter the required settings.
- IKE (Internet Key Exchange) with Preshared Key— Use this protocol to
set up a Security Association (SA) for your tunnel. (This setting is
recommended.) If you selected
Group VPN , this is the only option
available.
- IKE with Certificate— Use a certificate to authenticate a remote IKE
peer.
• Enable— Check to enable this VPN.
Configuring Easy VPN
Enter the following information:
• Name— Name to describe the tunnel. For a single user, you can enter the
username or location. This description is for your reference and does not
have to match the name used at the other end of the tunnel.
• Minimum Password Complexity —When enabled, the password minimum
requirements are:
- Eight characters in length.