Cisco Small Business RV320 Скачать руководство пользователя страница 96

Страница: 96 / 122

VPN

Client to Gateway

Cisco RV320/RV325 Administration Guide

•

IP + Email Address (USER FQDN) Authentication—

Client has a static IP

address and you want to use any email address for authentication. The
current WAN IP address appears automatically. Enter any

Email Address

use for authentication.

If you know the IP address of the remote VPN client, choose

IP Address

and then enter the address. If you do not know the IP address of the remote
VPN client, select

IP by DNS Resolved

, and then enter the real domain

name of the client on the Internet. The device gets the IP address of a
remote VPN client by DNS Resolved, and the IP address of the remote VPN
device is displayed in the VPN Status section of the Summary page.

•

Dynamic IP + Domain Name (FQDN) Authentication—

Client has a

dynamic IP address and a registered Dynamic DNS hostname (available
from providers such as DynDNS.com). Enter the

Domain Name

to use for

authentication. The domain name can be used only for one tunnel
connection.

•

Dynamic IP +

E-mail Addr.(USER FQDN) Authentication—

Client has a

dynamic IP address and does not have a Dynamic DNS hostname. Enter any

Email Address

to use for authentication.

Remote Client Setup for a Group

Specify the method for identifying the clients to establish the VPN tunnel. The
following options are available for a Group VPN:

•

Domain Name (FQDN) Authentication—

Identifies the client by a

registered domain name. Enter a

Domain Name

to use for authentication.

The domain name can only be used for one tunnel connection.

•

Email Address (USER FQDN) Authentication—

Identifies the client by an

E-mail address for authentication. Enter the address in the fields provided.

•

Microsoft XP/2000 VPN Client—

Client software is the built-in Microsoft

XP/2000 VPN Client.

Содержание Small Business RV320



























































































































Результаты поиска

Содержание Small Business RV320

Отзывы:

Похожие инструкции для Small Business RV320

Бренды по названию

Популярные бренды

Cisco Small Business RV320, Руководство администратора

Результаты поиска

Содержание Small Business RV320

Отзывы:

Похожие инструкции для Small Business RV320

Бренды по названию

Популярные бренды