4008226 Rev B
27
SNMP Management,
Continued
Adding Password Protection
Follow these steps to add password protection.
1.
From the Main Configuration screen, press
P
.
Result:
You will be asked to enter a password.
2.
Enter your password (spaces are NOT allowed) and press
Enter
.
Note:
Passwords are case sensitive.
Result:
You will then be asked for your password whenever you log on or
off.
Removing Password Protection
Follow these steps to remove password protection.
1.
From the Main Configuration screen, press
P
.
2. Press
Enter
.
Ending Your Session
From the Main Configuration screen, press
E
before disconnecting the cable in order
to stop the continuous stream of data to the serial port.
