24
4008226
Rev
B
SNMP Management,
Continued
•
Command List
Command Description
I
Enter New Saved Parameter Values
P Change
Password
T
New Trap Destination
K
Remove ALL Trap Destinations
C
New Community String
U
Delete ALL Community Strings
D Enable/disable
DHCP
E End
Session
Space
Device Specific Configuration options available here
Notes:
•
You must reboot after making any modifications to the Saved Values or your
changes will not take effect. To reboot, type
reboot
at the prompt on the main
configuration screen, or turn the chassis power
OFF
then
ON
again.
•
Because a Delete key is not available on VT-100 terminal emulators; use the
F2
key.
Assigning TCP/IP Information
Follow these steps to modify the Saved Parameter Values (i.e., assign IP address and
subnet mask).
1.
From the Main Configuration screen, press
I
.
2.
Enter the IP address for the connected device and press
Enter
.
3.
Enter the subnet mask for the connected device and press
Enter
.
4.
If desired, assign a default gateway
OR
to skip, press
Enter.
5.
When finished, press
Enter
.
6. Type
reboot
for changes to take effect.
Result:
The Saved Values and Current Values should now both display the
changes made (e.g., new IP address and subnet mask).
Continued on next page
