5-30
PA-MC-T3-EC Port Adapter Installation and Configuration
OL-10589-02
Chapter 5 Configuring the Channelized Mode
Checking the Configuration
•
show controllers T3
chassis-slot/t3-port
tabular
•
show controllers T3
chassis-slot/t3-port
remote performance
Examples of these
show controllers T3
commands for Cisco 7200 VXR routers are shown below.
The
show controllers
command with no arguments displays information about every controller and
interface in the router. Use the
show controllers T3
command to display information about the
PA-MC-T3-EC port adapter:
Router#
show controllers T3
T3 1/0 is up.
Applique type is Channelized T3
No alarms detected.
Framing is M23, Line Code is B3ZS, Clock Source is Internal
Equipment customer loopback
Data in current interval (77 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
0 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
Total Data (last 50 15 minute intervals):
0 Line Code Violations, 0 P-bit Coding Violation,
0 C-bit Coding Violation, 0 P-bit Err Secs,
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs,
0 Unavailable Secs, 0 Line Errored Secs,
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
T1 1 is up
timeslots: 1-24
FDL per AT&T 54016 spec.
No alarms detected.
Framing is ESF, Clock Source is Internal
Data in current interval (77 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
Total Data (last 50 15 minute intervals):
0 Line Code Violations,0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
(additional displayed text not shown)
Using the show controllers T3 brief Command
The following example of the
show controllers T3
chassis-slot/t3-port
brief
command output displays
a list of configurations only.
Router#
show controllers T3 2/0 brief
T3 2/0 is up.
Applique type is Channelized T3
No alarms detected.
Framing is M23, Line Code is B3ZS, Clock Source is Internal
Equipment customer loopback
T1 1 is up
timeslots: 1-24
FDL per ANSI T1.403 and AT&T 54016 spec.
No alarms detected.
Framing is ESF, Clock Source is Internal