Cisco ON100 Network Agent, Быстрый старт

Страница: 8 / 14

8 Cisco ON100 Network Agent Quick Start Guide
1 Steady Amber Starting software initialization.
2 Off
1 Steady Amber Acquiring an IP address.
If this pattern displays for more than two
minutes, it indicates that the OnPlus
Network Agent has failed to obtain an IP
address.
If a static IP is configured, this pattern is
never displayed for more than 10
seconds.
2 Blinking Amber
1 Steady Amber Completing software initialization.
2 Off
Software Download and Upgrade
1 Blinking Red Downloading and installing the base
software image (requires Internet
connection).
You will only see this pattern prior to
activation (during out-of-box installation)
or after a factory reset.
2 Blinking Red
1 Steady Green Upgrading software (requires Internet
connection).
2 Steady Amber
Restart
1 Blinking Green Restarting the OnPlus Network Agent.
The OnPlus Network Agent restarts after
a normal reset, factory reset, or software
upgrade.
2 Blinking Amber
Normal Operation / Ready for Activation
1 Steady Green Operating normally or ready for
activation.
2 Off
Status LEDs Description
STATUS
1 2
STATUS
1 2
STATUS
1 2
STATUS
1 2
STATUS
1 2
STATUS
1 2
STATUS
1 2