Cisco ON100 Network Agent, Быстрый старт

Страница: 4 / 14

4 Cisco ON100 Network Agent Quick Start Guide
Back Panel
Default Settings
Slot or Connector Description
AUX Not used.
SD CARD Not used.
MON Monitoring port.
This port must only be used as documented for
specific Cisco OnPlus solutions. For more
information, see
www.cisco.com/go/onplus .
LAN LAN port with PoE.
If the LAN port to which you are connecting the
OnPlus Network Agent does not support PoE, use
the external power adapter supplied with the
device.
RESET If held for less than 10 seconds, executes a safe
shutdown and restarts the OnPlus Network Agent.
If held for 10 seconds or more, initiates a factory
reset. See
Resetting the OnPlus Network Agent,
page 12 .
On/Off Switch Power the OnPlus Network Agent On or Off.
POWER Connector for the external power adapter, if used.
You can power the OnPlus Network Agent using PoE
or the external power adapter.
Setting Default Value
LAN IP addressing
method DHCP (required for initial startup only).
At initial startup, the OnPlus Network Agent must
obtain a LAN IP address using DHCP.
Once you are connected to the OnPlus Network
Agent and have started the activation process, you
can assign a static LAN IP address to the device if
needed.