© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 23 of 41
Note:
Use a relevant display command (for example,
show interface
or
show flogi database
) to obtain the
required value in hexadecimal format.
10. Activate the Zone Sets.
N5548-Bottom(config-zoneset)# zoneset activate name zoneset1 vsan 200
N5548-Top(config-zoneset)# zoneset activate name zoneset2 vsan 201
The following commands can now be used to check connectivity between the blade
server and the Cisco Nexus B22HP.
N5548-Bottom# show flogi database
-------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
-------------------------------------------------------------------------------
vfc1032 200 0x550000 10:00:b4:99:ba:fb:41:41 20:00:b4:99:ba:fb:41:41
Total number of flogi = 1.
N5548-Bottom#
N5548-Bottom# show fcns database
VSAN 200:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0x550000 N 10:00:b4:99:ba:fb:41:41 ipfc scsi-fcp:init
Total number of entries = 1
N5548-Bottom#
