Cisco Nexus 3548 series, Справочник по командам

Страница: 126 / 556

106
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
default-information originate (RIP)
default-information originate (RIP)
To generate a default route into the Routing Information Protocol (RIP), use the default-information
originate command. To disable this feature, use the no form of this command.
default-information originate [ always ] [ route-map map-name ]
no default-information originate
Syntax Description
Command Default Disabled
Command Modes Router address-family configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to originate a default route (0.0.0.0/0) to all routes that pass the Condition route
map:
switch# configure terminal
switch(config)# router rip Enterprise
switch(config-router)# address-family ipv4 unicast
switch(config-router-af)# default-information originate route-map Condition
switch(config-router-af)#
Related Commands
always (Optional) Generates the default route if the route is not in the RIP routing
information base.
route-map map-name (Optional) Generates the default route only if the route is permitted by the
route map. The map name is any alphanumerical string up to 63 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
address-family Enters address-family configuration mode.
default-metric Sets the metric for routes redistributed into RIP.
redistribute Redistributes routes from other routing protocols into RIP.
show ip rip route Displays the routes in RIP table.