Cisco Nexus 1000V, Руководство по устранению неисправностей, Страница: 241 / 280

24-5
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 24 Network Segmentation Manager
Problems with Network Segmentation Manager
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
Failed to set vmware
port-group
vCloud Director is unable to set
Vmware port group property on the
port profile. Check system logs for a port group property
failure message reported by NSM. See the
Cisco
NX-OS System Messages Reference for more
information.
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
Failed to set state enabled
vCloud Director is unable to set the
property state on the port profile to
enabled. Check system logs for a state enabled property
failure message reported by NSM. See the
Cisco
NX-OS System Messages Reference for more
information.
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
Failed to collect svs
configuration
vCloud Director is unable to
execute the command.
show svs connection
Verify that the Virtual Supervisor Module
(VSM) has an active SVS connection.
show svs connection
When you enter the command, the output must
display “operational status: connected”.
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
Operational status is missing
vCloud Director is unable to locate
the operational status in the SVS
connection. 1. Verify that the Virtual Supervisor Module
(VSM) has an active SVS connection.
show svs connection
When you enter the command, the output
must display “operational status:
connected”.
2.
Check system logs for a operational status
failure message. See the
Cisco NX-OS
System Messages Reference for more
information.
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
SVS connection is
disconnected
SVS connection is disconnected. Verify that the Virtual Supervisor Module
(VSM) has an active SVS connection.
show svs connection
When you enter the command, the output must
display
operational status: connected
The network creation triggered from
vCloud Director fails. A system
message similar to the following is
logged in vCloud Director:
Failed to create bridge
domain
vCloud Director is unable to create
the bridge dmain associated with
the network. Verify that the feature Segmentation is enabled.
show feature
If not, enable the segmentation feature by using
the
feature segmentation command.
Symptom Possible Causes Verification and Solution