Cisco Nexus 1000V, Руководство по устранению неисправностей, Страница: 162 / 280

12-12
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 12 Layer 2 Switching
Troubleshooting Microsoft NLB Unicast Mode
Troubleshooting Microsoft NLB Unicast Mode
Microsoft Network Load Balancing (MS-NLB) is a clustering technology offered by Microsoft as part
of the Windows server operating systems. Clustering enables a group of independent servers to be
managed as a single system for higher availability, easier manageability, and greater scalability.
For more information about Microsoft Network Load Balancing, see this URL:
http://technet.microsoft.com/en-us/library/bb742455.aspx
Note Access to third-party websites identified in this document is provided solely as a courtesy to customers
and others. Cisco Systems, Inc. and its affiliates are not in any way responsible or liable for the
functioning of any third-party website, or the download, performance, quality, functioning, or support
of any software program or other item accessed through the website, or any damages, repairs,
corrections, or costs arising out of any use of the website or any software program or other item accessed
through the website. Cisco's End User License Agreement does not apply to the terms and conditions of
use of a third-party website or any software program or other item accessed through the website.
Limitations and Restrictions
A syslog is generated if one of the following configurations exists when you try to disable automatic
static MAC learning for MS-NLB because they do not support this feature:
• PVLAN port
•
Ports configured with unknown unicast flood blocking (UUFB)
•
Ports configured with switchport port-security mac-address sticky
Disabling Automatic Static MAC Learning on a vEthernet Interface
You must disable automatic static MAC learning before you can successfully configure NLB on a
vEthernet (vEth) interface.
In interface configuration mode enter the following commands:
switch(config)# int veth 1
switch(config-if)# no mac auto-static-learn
In port profile configuration mode enter the following commands:
switch(config)# port-profile type vethernet ms-nlb
switch(config-port-prof)# n o mac auto-static-learn
Checking Status on a VSM
If the NLB unicast mode configuration does not function, check the status of the Virtual Supervisor
Module (VSM).
Confirm that the no mac auto-static-learn command is listed in the vEth and/or port profile
configurations.
Step 1 In interface configuration mode, generate the VSM status.