Cisco MWR 1941-DC - 1941 Mobile Wireless Router, Руководство по настройке программного обеспечения

Страница: 114 / 184

6-6
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
OL-11503-01
Chapter 6 Configuring the MWR 1941-DC in a Cell Site DCN
Configuring the Ethernet Switch Network Module
Configuration Example
The following is a sample output from the show running-config command for a FE interface:
interface FastEthernet0/0
ip address 172.18.28.202 255.255.255.128
ip helper-address 99.1.1.2
no ip mroute-cache
speed 100
full-duplex
Configuring the Ethernet Switch Network Module
The 16-port Ethernet Switch network module (NM-16ESW) is a high-density module that provides
Layer 2 switching across Ethernet ports. In a Cell Site DCN implementation, you can use the
NM-16ESW in the Cisco MWR 1941-DC router for a cell site LAN for IP connectivity for peripheral
equipment.
For information on configuring the NM-16ESW, see 16- and 36-Port Ethernet Switch Module for Cisco
2600 Series, Cisco 3600 Series, and Cisco 3700 Series Cisco IOS Release 12.2(T) feature module:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/ft1636nm.ht
m
Configuration Example
The following is a sample output from the show running-config command for a NM-16ESW:
interface FastEthernet0/0
ip address 172.18.28.206 255.255.255.128
no ip proxy-arp
speed 100
full-duplex
!
interface FastEthernet0/1
no ip address
no ip proxy-arp
Step 3
Router(config-if)# ip helper address
99.1.1.2
Configure the router to forward User Datagram
Protocol (UDP) broadcasts, including BOOTP,
received on an interface to a specific address.
Step 4
Router(config-if)# speed [ auto | 100 | 10 ] Configure the speed.
Step 5
Router(config-if)# duplex [ auto | half |
full ]
Configure the duplex operation
Step 6
Router(config-if)# exit
Exit back to global configuration mode.
Repeat Step 4 through Step 6 if your router has
more than one interface that you need to
configure.
Step 7
Router(config-if)# Ctrl-z
Router#
When you finish configuring interfaces, return to
enable mode.
Command Purpose