Contents
xi
Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Eight-Port FRSM Features
6-27
Configuring Frame Relay Service
6-27
Configuring the FRSM Cards, Lines, and Ports
6-28
Adding a Frame Relay Connection
6-31
Establishing the BPX 8600-to-BPX 8600 Series Segment
6-36
Test Commands for the FRSMs
6-36
Support for Alarm Reporting
6-37
Bit Error Rate Testing on an Unchannelized T3 or E3 FRSM
6-37
Circuit Emulation Service Module for T3 and E3
6-38
Features
6-38
Cell Delay Treatment
6-38
Error and Alarm Response
6-39
Configuring Service on a T3 or E3 CESM
6-39
Configuring the Card, Lines, and Ports
6-40
Adding and Modifying Connections
6-40
Bit Error Rate Testing on a T3 or E3 CESM
6-42
Eight-Port Circuit Emulation Service Modules
6-42
Structured Data Transfer
6-43
Unstructured Data Transfer
6-43
Cell Delay Treatment
6-44
Redundancy Support for the Eight-Port CESM
6-44
Error and Alarm Response
6-44
Configuring Service on an Eight-Port CESM
6-45
Configuring the Card, Lines, and Ports
6-45
Configuring Bulk Distribution and Redundancy
6-46
Adding and Modifying Connections
6-47
Service Resource Module
6-49
Configuring Card and Line Parameters
6-49
Bulk Distribution for T1 Service
6-50
Redundancy Support by the MGX-SRM-3T3/C
6-51
Configuring Redundancy Through the Redundancy Bus
6-51
Configuring Redundancy Through the Distribution Bus
6-52
Bit Error Rate Testing Through an MGX-SRM-3T3
6-53
Pattern Test Options
6-55
Loopback Test Options
6-56
Online Diagnostics test
6-56
Automatic Switchover
6-56
Alarms
6-56
Log Files
6-57