background image

LAN Interfaces - RJ45

4 x RJ45 / 1 Gigabit Ethernet LAN ports

4 x RJ45 / 1 Gigabit Ethernet LAN ports

LAN Interfaces - SFP+

2 x SFP+ / 10 Gigabit Ethernet LAN ports

2 x SFP+ / 10 Gigabit Ethernet LAN ports

Management port

1 x RJ45 management port for local status page

access

1 RJ45 management port for local status page

access

Mount Type

Rack Mount

Rack Mount

Dimensions (h x d x w)

1.73" x 11.23" x 19"

44 x 285.2 x 484.6mm

1.73" x 12.4" x 19"

44 x 285.2 x 484.6 mm

Weight

6.99lbs (3.17kg)

10.74lbs (4.87kg)

2 Fans and 2 PSUs inserted

Power Supply

Internal 100-220V 50/60 Hz AC

Modular 100-220V 50/60Hz AC

2 x 150WAC PSU

Power Load (idle/max)

42W / 109W

53W / 123W

Operating Temperature

32°F to 104°F

(0°C to 40°C)

32°F to 104°F

(0°C to 40°C)

Storage and
Transportation Temperature

-4°F - 158°F

-20°C - 70°C

-4°F - 158°F

-20°C - 70°C

Humidity

5% to 95%

5% to 95%

Accessories

The Cisco Meraki MX95/105 models support pluggable optics for high-speed backbone connections between wiring closets or to aggregation switches. Cisco
Meraki offers several standards-based Gigabit and 10 Gigabit pluggable modules. Each appliance has also been tested for compatibility with several third party
modules.

Accessory

Description

MA-PWR-CORD-US

1x AC Power Cable, US plug

MA-PWR-CORD-EU

1x AC Power Cable, EU plug

3

Содержание Meraki MX105 Series










Отзывы: