Once done, attach the base mount plate onto the desired surface using the three provided screws.
It is important that care is taken during this step! The image sensor on the fisheye camera is fixed. Once
physical installation is complete, the image can only be rotated by 180 degrees in software and no other
adjustments can be made.
Note:
Never attempt to open the camera dome to adjust the lens rotation. This will void the camera's warranty
and likely cause damage to the hardware
11
Содержание Meraki MV32
