Required Tools and Equipment
3
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
78-16489-01
Required Tools and Equipment
To upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM, you need the following
tools and equipment:
•
Computer with terminal emulation software installed
•
DB9-female-to-DB9-female null-modem cable
•
Phillips #2 screwdriver
•
ESD protection
•
Small flashlight
•
Blank diskette
•
Releasable cable tie
How to Upgrade to the Cisco MeetingPlace Audio Server
Release 5.2 DVD-ROM
To upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM, perform the following
procedures in the order shown:
•
Saving the License Keys, page 3
•
Powering Down the Cisco MeetingPlace 8112, page 4
•
Removing the Tape Drive from the Cisco MeetingPlace 8112, page 4
•
Installing the DVD-ROM Drive into the Cisco MeetingPlace 8112, page 7
•
Upgrading the Cisco MeetingPlace 8112 BIOS, page 9
•
Troubleshooting BIOS Upgrade Failure, page 11
•
Installing the DVD-ROM Drive Software, page 13
•
Verifying the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade, page 14
Saving the License Keys
To save the license keys, perform the following steps:
Step 1
By using the null-modem cable, connect the laptop to the COM1 service port on the front of the
Cisco MeetingPlace 8112.
Step 2
Through a Telnet session or HyperTerminal, log in as a technician.
The tech$ prompt appears.
Step 3
Insert a blank disk into the floppy disk drive.
