Scope
2
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
78-16489-01
Scope
This document provides instructions for removing the tape drive and installing the DVD-ROM drive in
to the Cisco MeetingPlace 8112.
To locate additional information about the Cisco MeetingPlace 8112 or other Cisco MeetingPlace
products, see the
“Additional References” section on page 15
.
Required Hardware and Software
You need the following hardware and software to upgrade to the Cisco MeetingPlace Audio Server
Release 5.2 DVD-ROM:
Required Hardware and Software
The following is required to upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM:
•
MP-8112-DVD-KIT=Cisco MeetingPlace 8112 DVD-ROM Retrofit Kit
•
Cisco MeetingPlace 8112 DVD-ROM Kit (must be returned)—Contact your NCE to obtain this kit,
which contains the following items:
–
BIOS 5.2 IDE Enable Diskette
–
Update Diskette for M3 DVD-ROM Retrofit Kit
–
Cisco MeetingPlace 8112 power cable for hard drives, CD-ROM, and floppy drive
–
Internal 4-drop SCSI cable
–
7” VGA monitor
–
Slim keyboard
In addition to the software in the Cisco MeetingPlace 8112 DVD-ROM Kit, the following software is
required:
Note
When you upgrade from Cisco MeetingPlace Audio Server Release 5.0.2 or Release 5.1.0 to
Release 5.2, you must upgrade the hardware before you upgrade the software.
•
MP-AUDIO-CD-5.2.0=Cisco MeetingPlace 8100 Audio Conference Software 5.2.0 Media Kit
•
MP-MT-CD-5.2.0=Cisco MeetingPlace MeetingTime 5.2.0 Media Kit
•
MP-BACKUP-CD5.2.0=Cisco MeetingPlace Network Backup Gateway 5.2 Media Kit
Recommended Hardware
We recommend that you have the following hardware for contingency:
•
MP-8112-CPU=Cisco MeetingPlace 8112 CPU Card
