Cisco ME 3400 Series, Руководство по настройке программного обеспечения

Страница: 676 / 1138

33-50
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Chapter 33 Configuring QoS
Configuring QoS
Creating Parent-Policy Class Maps
Beginning in privileged EXEC mode, follow these steps to create one or more parent-policy class maps:
Creating Child Policy Maps
Beginning in privileged EXEC mode, follow these steps to create one or more child policy maps:
Step 5
show class-map Verify your entries.
Step 6
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2
class-map match-any
parent-class-map-name
Create a match-any class map for the parent policy, and enter class-map
configuration mode.
Note
You can enter match-all or not enter either match-any or
match-all (to default to match-all ) if you are going to match only
one VLAN ID.
Step 3
match vlan vlan-id Define the VLAN or VLANs on which to classify traffic.
For vlan-id, specify a VLAN ID, a series of VLAN IDs separated by a
space, or a range of VLANs separated by a hyphen to be used in a parent
policy map for per-port, per-VLAN QoS on a trunk port. The VLAN ID
range is 1 to 4094.
You can also enter the match vlan command multiple times to match
multiple VLANs.
Step 4
end Return to privileged EXEC mode.
Step 5 show class-map Verify your entries.
Step 6 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2 policy-map child-policy-map-name Create a child policy map by entering the policy map name, and enter
policy-map configuration mode.
Step 3
class { child-class-map-name |
class-default }
Enter a child class-map name or class-default to match all unclassified
packets, and enter policy-map class configuration mode.
Step 4
Use the police policy-map class configuration command to configure policers and the action to take for a class of
traffic, or use the set policy-map class configuration command to mark traffic belonging to the class.
Step 5 end Return to privileged EXEC mode.
Step 6 show policy-map [ child-
policy-map-name [ class
class-map-name ]]
Verify your entries.
Step 7 copy running-config startup-config (Optional) Save your entries in the configuration file.