manualshive.com logo in svg

Cisco ME 3400 Series, Руководство по настройке программного обеспечения

Серия продуктов Cisco ME 3400 - это надежные коммутаторы для сетей малых и средних предприятий. Получите бесплатное программное руководство по настройке нашего оборудования, загрузив его с {веб-сайта}. Руководство по настройке программного обеспечения доступно для скачивания на русском языке.

Поделиться
Скачать
background image

 

1-4

Cisco ME 3400 Ethernet Access Switch Software Configuration Guide

OL-9639-07

Chapter 1      Overview

Features

  •

DHCP relay for forwarding User Datagram Protocol (UDP) broadcasts, including IP address 
requests, from DHCP clients

  •

DHCP server for automatic assignment of IP addresses and other DHCP options to IP hosts

  •

DHCP-based autoconfiguration and image update to download a specified configuration a new 
image to a large number of switches

  •

DHCP server port-based address allocation for the preassignment of an IP address to a switch port

  •

Directed unicast requests to a DNS server for identifying a switch through its IP address and its 
corresponding hostname and to a TFTP server for administering software upgrades from a TFTP 
server

  •

Address Resolution Protocol (ARP) for identifying a switch through its IP address and its 
corresponding MAC address

  •

Unicast MAC address filtering to drop packets with specific source or destination MAC addresses

  •

Configurable MAC address scaling that allows disabling MAC address learning on a VLAN to limit 
the size of the MAC address table 

  •

Cisco Discovery Protocol (CDP) Versions 1 and 2 for network topology discovery and mapping 
between the switch and other Cisco devices on the network (supported on NNIs by default, can be 
enabled on ENIs, not supported on UNIs)

  •

Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) for 
interoperability with third-party IP phones (supported only on NNIs or ENIs; requires the metro IP 
access image or metro access image)

  •

Support for the LLDP-MED location TLV that provides location information from the switch to the 
endpoint device (requires the metro IP access or metro access image)

  •

Network Time Protocol (NTP) for providing a consistent time stamp to all switches from an external 
source

  •

Cisco IOS File System (IFS) for providing a single interface to all file systems that the switch uses

  •

In-band management access for up to 16 simultaneous Telnet connections for multiple CLI-based 
sessions over the network

  •

In-band management access for up to five simultaneous, encrypted Secure Shell (SSH) connections 
for multiple CLI-based sessions over the network (requires the cryptographic versions of the switch 
software).

  •

In-band management access through SNMP Versions 1, 2c, and 3 get and set requests 

  •

Out-of-band management access through the switch console port to a directly attached terminal or 
to a remote terminal through a serial connection or a modem

  •

User-defined command macros for creating custom switch configurations for simplified deployment 
across multiple switches

  •

Support for metro Ethernet operation, administration, and maintenance (OAM) IEEE 802.1ag 
Connectivity Fault Management (CFM), Ethernet Line Management Interface (E-LMI) on 
customer-edge and provider-edge switches, and IEEE 802.3ah Ethernet OAM discovery, link 
monitoring, remote fault detection, and remote loopback, and IEEE 802.3ah Ethernet OAM 
discovery, link monitoring, remote fault detection, and remote loopback (requires the metro IP 
access or metro access image)

  •

Configuration replacement and rollback to replace the running configuration on a switch with any 
saved Cisco IOS configuration file

Содержание ME 3400 Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ME 3400 Series

Makita RF1101 Parts Breakdown preview
RF1101
Бренд: Makita Страницы: 2
National Instruments NI 9265 Operating Instructions Manual preview
NI 9265
Бренд: National Instruments Страницы: 26
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Бренд: National Instruments Страницы: 85
National Instruments Module SCXI-1503 User Manual preview
Module SCXI-1503
Бренд: National Instruments Страницы: 79
Black Box JPM083A Manual preview
JPM083A
Бренд: Black Box Страницы: 9
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
NETGEAR AC1450 Installation Manual preview
AC1450
Бренд: NETGEAR Страницы: 14
Vaisala TERMBOX-1200 User Manual preview
TERMBOX-1200
Бренд: Vaisala Страницы: 32
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Бренд: Watchguard Страницы: 40
ZyXEL Communications P-974H - V3.70 Manual preview
P-974H - V3.70
Бренд: ZyXEL Communications Страницы: 116
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Бренд: Aztech Страницы: 40
Juniper MX2010 Hardware Manual preview
MX2010
Бренд: Juniper Страницы: 825
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Бренд: Lucent Technologies Страницы: 20
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Бренд: TRENDnet Страницы: 15
impinj Speedway Revolution Installation And Operation Manual preview
Speedway Revolution
Бренд: impinj Страницы: 60
Patton electronics Model 2711 User Manual preview
Model 2711
Бренд: Patton electronics Страницы: 13
Angel Cool Aironet 1200 Quick Start Manual preview
Aironet 1200
Бренд: Angel Cool Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды