9
Send documentation comments to [email protected]
9
Using the Quick Config Wizard
To enable ports and assign zone memberships, follow these steps:
Step 1
Click the Device Manager icon on your desktop to log in.
Step 2
Enter a password in the Password field (see
Figure 10
).
Step 3
Click Open (see
Figure 10
).
Figure 10
Device Manager Login
Step 4
Click FC, and then choose Quick Config.
Step 5
Enable two ports by checking the two corresponding check boxes in the Enable column, as shown in
Figure 11
.
Figure 11
Enable Zone Ports
Step 6
Select one of the two enabled ports that you want in a zone by checking its check box in the Ports Zoned To area.
When you check this check box, the second enabled port automatically becomes checked. Both ports are now members
of the same zone.
Step 7
Click Next.
You see a summary of your changes, as shown in
Figure 12
.
