background image

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive
San Jose, CA 95134-1706

USA

www.cisco.com
Tel:

408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Asia Pacific Headquarters

Cisco Systems, Inc.

168 Robinson Road
#28-01 Capital Tower

Singapore 068912

www.cisco.com
Tel:

+65 6317 7777

Fax: +65 6317 7799

Europe Headquarters

Cisco Systems International BV

Haarlerbergpark
Haarlerbergweg 13-19

1101 CH Amsterdam

The Netherlands
www-europe.cisco.com

Tel:

31 0 800 020 0791

Fax: 31 0 20 357 1100

Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the 

Cisco Website at www.cisco.com/go/offices.

CCDE, CCENT, CCSI, Cisco 

Eos, Cisco 

HealthPresence, Cisco 

IronPort, the Cisco 

logo, Cisco 

Nurse Connect, Cisco 

Pulse, Cisco 

SensorBase, 

Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco  Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, 
Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way 
We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green 
are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, 
CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, 
the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, 
GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, 
Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, 
SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in 
the United States and certain other countries. 

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership 
relationship between Cisco and any other company. (0910R)

© 2010 Cisco Systems, Inc. All rights reserved.

OL-21517-01

Send documentation comments to [email protected]

Содержание MDS 9148















Отзывы: