Cisco Mc3810 - 16MB Flash Memory, Конфигурация

Страница: 8 / 16

Configuring Cisco MC3810 Series Concentrators to Use High-Performance Compression Modules
codec (dial-peer)
8
Cisco IOS Release 12.1(2)T
codec (dial-peer)
To specify the voice codec for a network dial peer, enter the codec dial-peer configuration command.
Use the no form of this command to restore the default value.
codec codec [ bytes payload-size ]
no codec
Syntax Description
Defaults If no codec is specified, dial peers are configured for g729r8 and the voice payload is as shown in Table 3
for G.729r8.
If a codec is specified without the bytes keyword, the voice payload is as shown in Table 3.
Command Modes Dial-peer configuration
codec Codec options on Cisco MC3810 series equipped with HCM, and with codec
complexity set to
high or medium :
•
g711alaw —G.711 A Law, 64000 bps
• g711ulaw —G.711 u Law, 64000 bps
•
g723ar53 —G.723.1 Annex A, 5300 bps
• g723ar63
—G.723.1 Annex A, 6300 bps
•
g723r53 —G.723.1, 5300 bps
• g723r63 —G.723.1, 6300 bps
•
g726r16 —G.726, 16000 bps
• g726r24 —G.726, 24000 bps
•
g726r32 —G.726, 32000 bps
• g728
—G.728, 16000 bps
•
g729abr8 —G.729 Annex A and Annex B, 8000 bps
• g729ar8 —G.729 Annex A, 8000 bps
•
g729br8 —G.729 Annex B, 8000 bps
• g729r8 —G.729, 8000 bps
bytes (Optional) The voice payload for each frame.
payload-size (Optional) Number of bytes you specify as the voice payload of each frame.
Values depend on the codec type and the packet voice protocol. See Table 3 for
valid entries and default values.