Cisco Linksys WAP4410N, Руководство пользователя

Страница: 87 / 88

WAP4410N User Guide 82
Operating Modes Access Point Mode, point-to-point Bridge Mode, point-to-multipoint
Bridge Mode, Repeater Mode, Wireless Client Mode
Load Balancing This capability allows the bandwidth control with user defined CPU
usage ratio
Auto-channel
selection On boot up, the AP selects the least congested channel
802.11d With 802.11d Regulatory Domain support, the AP provides radio
channel settings for client devices facilitating easy client access as
they move across regulatory domains
WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access Control Wireless Connection Control: MAC-Based
SSID Broadcast SSID Broadcast Enable/Disable
Client Isolation Supports wireless client isolation between SSIDs
802.1x Wireless clients can be authenticated through IEEE 802.1x
802.1x Supplicant Supports 802.1x Supplicant on the Ethernet port to allow the AP to
authenticate itself to the network
Radius Server Up to 2 Radius Servers can be configured for redundancy purposes
WPS Supports WPS (WiFi Protected Setup) which is a WIFI Alliance
specification for simple and secure setup of a wireless network
Rogue AP
Detection New Access Points detected, which have not been categorized as
known, are logged as a Rogue AP. This allows the administrator to
control unapproved devices in the network.
QoS 4 queues, 802.1p VLAN priority, WMM Wireless priority, Mapping of
802.1p priority to WMM priority to maintain end-to-end QoS
Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM
Channels Operating Channels: 11 North America, 13 Most of Europe (ETSI and
Japan)
Internal Antenna None
External Antennas 3 (Omni-Directional)
WAP4410N Specifications