Cisco Linksys WAP4410N, Руководство пользователя

Страница: 17 / 88

WAP4410N User Guide 12
Overview
Setting Up the Wireless-N Access Point
Setting Up the Wireless-N Access Point
Overview
The Access Point has been designed to be functional right out of the box with the default
settings. However, if you'd like to change these settings, the Access Point can be configured
through your web browser with the Web-based Utility. This chapter explains how to use the
Utility to perform the most basic settings.
The Utility can be accessed via web browsers, such as Microsoft Internet Explorer or Mozilla
Firefox through the use of a computer that is networked with the Access Point.
For a basic network setup, most users only have to use the following screens of the Utility:
• Setup
On the Setup screen, enter your basic network settings (IP address) here.
• Management
Click the Administration tab and then select the Management screen . The Access
Point’s default password is admin . To secure the Access Point, change the AP Password
from its default.
Most users will also customize their wireless settings:
• Wireless
On the Wireless screen, change default SSID under the Basic Wireless Settings Tab.
Select the level of security under the Wireless Security Tab and complete the options
for the selected security mode.
Accessing the Utility
There are three ways to connect to your Access Point for the first time.
• If you have a 48VDC Power Injector (e.g. Linksys WAPPOE), power up your Access Point
first, then connect the Injector’s cable to your PC. Configure your PC to have the static IP
address on the same subnet as the Access Point’s default IP address (192.168.1.245).
• If you have a PoE switch (e.g. Linksys SRW224P), connect your Access Point and your PC
to the same network. Configure your PC to have the static IP address on the same
subnet as the Access Point’s default IP address (192.168.1.245). Or if there is a DHCP
server connected to the switch, configure it to assign the IP address in 192.168.1.0/24
subnet. Your PC will get an IP address in the subnet through the DHCP.
• Although it is not recommended, you can connect your PC wirelessly to the Access Point
when the DHCP server is connected on the LAN side. It is not recommended, because
you can easily lose your connection through configuration changes.
NOTE:
Make sure you have Enabled TCP/IP on your PCs
prior to proceeding. PCs communicate over the network
with this protocol.