Cisco Linksys WAG310G, Руководство пользователя

Страница: 40 / 164

Chapter 3 Setup
20 3425-00669 Rev E

VBR_rt or VBR_nrt. VBR (Variable Bit Rate) is used for bursty traffic and
bandwidth-sharing with other applications. VBR_rt (real time) is more time-
sensitive than VBR_nrt (non-real time), and VBR_rt is typically used for voice
and video traffic.
Notes:

If the QoS Type setting is CBR, then the Scr Rate and Max Burst Size settings
are not configurable.

If the QoS Type setting is UBR, then the Pcr Rate, Scr Rate, and Max Burst
Size settings are not configurable.

If the QoS Type setting is VBR-rt or VBR-nrt, set the appropriate Pcr Rate,
Scr Rate, and Max Burst Size values.
Note : The values entered are interpreted as ATM Cells per second (cps).
3 If required by your service provider, enter a rate in the PCR Rate field.
Note : The Peak Cell Rate (PCR) is the maximum allowable rate at which cells can
be transported. Enter the rate in the field (if required by your service provider).
4 If required by your service provider, enter a rate in the SCR Rate field.
Note : The Sustainable Cell Rate (SCR) sets the average cell rate that can be
transmitted. The SCR value is normally less than the PCR value. Enter the rate in
the field ( provider).
5 For the Max Burst Size , enter the number of contiguous (ATM) cells allowed to
be send in one burst.
6 For the Autodetect , select Enable to have the settings automatically entered, or
select Disable to enter the values manually.
Note : Autodetect requires a PVC value which is part of the “pre-configured
range” of default PVCs being 0/35, 8/35, 0/43, 0/51, 0/59, 8/43, 8/51, and
8/59. Other values will not be autodetected and should be entered manually.
7 Enter the settings provided by your service provider for each of the following
Virtual Circuit settings:

VPI (Virtual Path Identifier)

VCI (Virtual Channel Identifier).
8 For the DSL Modulation , select the appropriate mode from the list of available
options; then, click Save Modulation to save the modulation setting.

MultiMode

T1.413

G.DMT

G.lite

ADSL2

ADSL2 (Annex L)

ADSL2 (Annex M)

ADSL2+