81
Chapter 6: Configuring Device Interfaces
Configuring LACP
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
6
Configuring LACP
Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports
with the same speed, set to full-duplex operations.
Aggregated Links can be manually setup or automatically established by enabling Link Aggregation
Control Protocol (LACP) on the relevant links. Aggregate ports can be linked into link-aggregation
port-groups. Each group is comprised of ports with the same speed.
LACP Page
The
LACP Page
contains fields for configuring LACP LAGs.
•
LACP System Priority
— Indicates the global LACP priority value. The possible range is 1-
65535. The default value is 1.
•
Port
— Defines the port number to which timeout and priority values are assigned.
•
Port Priority
— Defines the LACP priority value for the port. The field range is 1-65535.
•
LACP Timeout
— Administrative LACP timeout. The possible field values are:
–
Short
— Defines a short timeout value.
–
Long
— Defines a long timeout value. This is the default value.