147
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
12
Defining Trap Management
The Defining Trap Management section contains the following pages:
• Defining Trap Settings
• Configuring Station Management
• Defining SNMP Filter Settings
Defining Trap Settings
The
Trap Settings Page
contains parameters for defining SNMP notification parameters.
Trap Settings Page
The
Trap Settings Page
contains the following fields:
•
Enable SNMP Notification
— Specifies whether the device can send SNMP notifications.
The possible field values are:
–
Checked
— Enables SNMP notifications.
–
Unchecked
— Disables SNMP notifications.
•
Enable Authentication Notification
— Specifies whether SNMP authentication failure
notification is enabled on the device. The possible field values are:
–
Checked
— Enables the device to send authentication failure notifications.
–
Unchecked
— Disables the device from sending authentication failure notifications.