Cisco Linksys E2500, Руководство пользователя

Страница: 24 / 38

21
Advanced Dual-Band N Router
Linksys E2500
Chapter 1: Advanced Configuration
Voice Device
Voice Device
Enter a Name
Enter a name for your voice device .
MAC Address
Enter the MAC address of your voice
device .
Priority Select the appropriate priority: High
(Recommended) , Medium , Normal , or Low .
Click Apply to save your changes . Your new entry will
appear in the Summary list .
Summary
This lists the QoS entries you have created for your
applications and devices .
Priority This column displays the bandwidth priority of
High, Medium, Normal, or Low .
Name This column displays the application, game,
device, or port name .
Information This column displays the port range or
MAC address entered for your entry . If a pre-configured
application or game was selected, there will be no valid
entry shown in this section .
Remove Click this button to remove an entry .
Edit Click this button to make changes .
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes .
Administration > Management
The Management screen allows the network’s
administrator to manage specific Router functions for
access and security .
Administration > Management
Router Password
Router Access
To ensure the Router’s security, you will be asked for your
password when you access the Router’s browser-based
utility . The default is
admin
.
Router Password
Enter a new password for the Router .
Re-enter to confirm Enter the password again to confirm .
Local Management Access
Access via HTTP (HyperText Transport Protocol) is the
communications protocol used to connect to servers
on the World Wide Web . HTTPS uses SSL (Secure Socket
Layer) to encrypt data transmitted for higher security .
Select
HTTP or HTTPS . The default is HTTP .
Access via Wireless If you are using the Router in a public
domain where you are giving wireless access to your
guests, you can disable wireless access to the Router’s
web-based utility . You will only be able to access the utility
via a wired connection if you disable the setting . Keep the
default,
Enabled , to allow wireless access to the utility, or
select Disabled to block wireless access to the utility .
Remote Management Access
Remote Management To permit remote access of the
Router from the Internet (outside the local network),
select
Enabled . Otherwise, keep the default, Disabled .