Figure 6: Attaching the DIN Rail Bracket for horizontal mounting
1.
Attach the DIN mounting bracket (
1
) to the router using the two screws provided in the kit (
2
). Position
the bracket over the two mounting holes (
3
) that correspond to your orientation. Then use 13-15 in-lbs
pounds of torque to screw the bracket onto the router.
2.
Once the bracket is attached to the router, it can be mounted onto the DIN Rail.
Attaching the Bracket onto the DIN Rail
To attach the Cisco IR807 with the bracket to a DIN rail, follow these steps. Refer to
Figure 7: Attaching the
Bracket to the DIN Rail, on page 32
for details.
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
31
Installing the Router
Attaching the Bracket onto the DIN Rail
