20
Switch Installation
Installing the Switch
Attaching Brackets for 23-Inch Racks
If 23-inch brackets (RM-RGD-23IN=) are required, follow steps in
Figure 12 on page 20
for installation.
Note:
23-inch and ETSI brackets should not be used in high vibration environments, including any railway application
(EN50155).
Note:
For IP-30 compliance: If you use 23-inch brackets or ETSI brackets, you can insert the rubber plugs in the same
holes as shown in
Figure 11 on page 19
before installing the brackets.
Figure 12
Attaching 23-Inch Brackets
Note:
For IP-30 compliance: If you use 23-inch brackets, you can insert the rubber plugs in the same holes as shown in
Figure 11 on page 19
before installing the brackets.
