Cisco HGA9N Administration Guide
19
3
STEP 5
Attach the male end of the cable that has the white tape around it to the
Wireless-G Exterior Access Point.
Figure 15 Connect the Access Point to the Cable
STEP 6
If you are mounting to a pole, insert the pole (not included) into the mounting
bracket assembly. As discussed previously, the pole must give the antenna at least
2 meters of clearance from the ground.
STEP 7
If you are mounting to a base (not included), make sure the base is secure.
Congratulations! The connection is complete. You can begin using the
Cisco HGA9N High Gain Omni-Directional Antenna.
