manualshive.com logo in svg

Cisco FM PONTE-50, Руководство по установке и настройке

Поделиться
Скачать
Cisco FM PONTE-50 Скачать руководство пользователя страница 77

Encryption

, 

DES

 (Data Encryption Standard) and 

AES

(Advanced Encryption Standard).

IMPORTANT

The same encryption protocol must be set for all
Fluidmesh units in the wireless network.

6.

To change the current encryption passphrase, enter a new
passphrase in the 

SNMP v3 encryption passphrase:

 field. The

default encryption passphrase is 

fluidmesh

. To show the

passphrase as it is being typed, check the 

Show SNMP v3

encryption passphrase:

 check-box.

7.

SNMP traps can be enabled for significant system-related events.
If needed, enable SNMP event traps by checking the 

Enable

SNMP event trap:

 check-box, and enter the name of the network

management station (NMS) host in the 

NMS hostname:

 field.

IMPORTANT

The NMS host to which traps are sent must have an
SNMP agent configured to collect v2c traps.

8.

You can also configure the unit to send SNMP traps at defined
periodic intervals. If needed, enable periodic SNMP traps by
checking the 

Enable SNMP periodic trap:

 check-box, and enter

the name of the network management station (NMS) host in the

NMS hostname:

 field.

9.

Save the SNMP settings by clicking the 

Save

 button.

Alternatively, clear the settings by clicking the 

Reset

 button.

7.6.6. VLAN settings

VLAN configuration

The 

VLAN SETTINGS

 window contains controls to connect the Cisco FM

Ponte kit to one or more virtual local area networks (VLANs) that are part
of the local wireless network.

IMPORTANT

The  VLAN  feature  must  be  enabled  using  a  software  plug-in
(Fluidmesh  part  number 

FM-VLAN

).  Contact  your  Fluidmesh

Networks representative for details.

The  Cisco  FM  Ponte  kit  features  smart  self-management  of  integration
with connected VLANs, with minimal configuration time and avoidance of
potential  configuration  errors.  This  is  done  by  A)  relying  on  the  data-
processing  configuration  of  a  connected  network  switch,  and  B)  obeying
predefined rules for management of incoming and outgoing data packets.

Device configuration using the configurator interface

© 2021 Cisco and/or its affiliates. All rights reserved.

Page 77 of 132

Содержание FM PONTE-50





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды