4
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
Product Overview
Note
On older inline network adapters, the LEDs are labelled 0, 1, 2, and 3. These correspond to W1, L1, W0,
and L0 respectively.
Adapter Specifications
Table 2
describes the inline network adapter technical and general specifications.
Table 1
Inline Network Adapter LEDs
LEDs
State
Description
Link / Activity
On
The 10/100/1000BASE-T interface is receiving power.
Blinking
The Ethernet link is transmitting data.
100
On
The speed of the Ethernet connection is 100BASE-TX.
1000
On
The speed of the Ethernet connection is 1000BASE-TX.
Bypass
Both the 100 and
1000 LEDs are on
The corresponding ports are in mechanical bypass mode.
Table 2
Inline Network Adapter Specifications
Specification
Description
Copper Gigabit Ethernet Specifications
IEEE standard
Gigabit Ethernet, 1000BASE-T
Fast Ethernet, 100BASE-T
Ethernet, 10BASE-T
Full duplex and half duplex
Supports both half-duplex and full-duplex operation in all
operating speeds
Autonegotiation
Autonegotiates between full-duplex and half-duplex operations
and between 1000-Mbps, 100-Mbps, and 10-Mbps speeds
Data transfer rate
1000-Mbps, 100-Mbps, and 10-Mbps speeds per port in
half-duplex mode
2000-Mbps, 200-Mbps, and 20-Mbps speeds per port in
full-duplex mode
General Technical Specifications
Interface standard
PCI v2.2 32/64 bit, 33/66 MHz
PCI-X v1.0 32/64 bit, 66/100/133 MHz
Size
6.6 x 4.2 in. (167.64 x 106.68 mm)
PCI connector
Universal 64-bit connector
PCI voltage
+12 V (minimum 11.4 V, maximum 12.6 V)
+3.3 V (minimum 3.0 V, maximum 3.6 V)
Weight
6.18 oz (175 grams)
