manualshive.com logo in svg

Cisco EX60, Руководство администратора, Страница: 65 / 134

Поделиться
Скачать
Cisco EX60 Скачать руководство пользователя страница 65

Cisco TelePresence System EX Series 

Administrator Guide

D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 

65

Conference [1..1] Encryption Mode

Set the conference encryption mode. A padlock with the text "Encryption on" or "Encryption 

off" displays on screen for a few seconds when the conference starts.
noTE: requires the Encryption option Key to be installed. When the Encryption option Key is 

not installed the encryption mode is set to off.

Requires user role:

 ADmIn

Value space:

 <off/on/BestEffort>

Off:

 The system will not use encryption.

On:

 The system will only allow calls that are encrypted.

BestEffort:

 The system will use encryption whenever possible. 

 > In Point to point calls:

 If the far end system supports encryption (AES-128), the call will be 

encrypted. If not, the call will proceed without encryption. 

 > In MultiSite calls:

 In order to have encrypted multiSite conferences, all sites must support 

encryption. If not, the conference will be unencrypted.

Example:

 Conference 1 Encryption Mode: BestEffort

Conference [1..1] DefaultCall Protocol

Set the Default Call Protocol to be used when placing calls from the system.

Requires user role:

 ADmIn

Value space:

 <Auto/H323/Sip/H320>

Auto:

 Enables auto-selection of the call protocol based on which protocols are available. 

If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the 

system cannot register, or the call protocol is not enabled, the auto-selection chooses H323. 

H323:

 H323 ensures that calls are set up as H.323 calls.

Sip:

 Sip ensures that calls are set up as SIP calls.

H320:

 H320 ensures that calls are set up as H.320 calls (only applicable if connected to a 

Cisco TelePresence ISDn link gateway).

Example:

 Conference 1 DefaultCall Protocol: H323

Conference [1..1] DefaultCall Rate

Set the Default Call rate to be used when placing calls from the system.

Requires user role:

 ADmIn

Value space:

 <64..6000>

Range:

 Select a value between 64 and 6000 kbps.

Example:

 Conference 1 DefaultCall Rate: 1920

Conference [1..1] MaxTransmitCallRate

Specify the maximum transmit bit rate to be used when placing or receiving calls. note that this 

is the maximum bit rate for each individual call; use the Conference maxTotalTransmitCallrate 

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role:

 ADmIn

Value space:

 <64..6000>

Range:

 Select a value between 64 and 6000 kbps.

Example:

 Conference 1 MaxTransmitCallRate: 6000

Conference [1..1] MaxReceiveCallRate

Specify the maximum receive bit rate to be used when placing or receiving calls. note that this 

is the maximum bit rate for each individual call; use the Conference maxTotalreceiveCallrate 

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role:

 ADmIn

Value space:

 <64..6000>

Range:

 Select a value between 64 and 6000 kbps.

Example:

 Conference 1 MaxReceiveCallRate: 6000

Содержание EX60







































































































































Отзывы:

Нет отзывов