manualshive.com logo in svg

Cisco EX60, Руководство администратора

Поделиться
Скачать
Cisco EX60 Скачать руководство пользователя страница 113

Cisco TelePresence System EX Series 

Administrator Guide

D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 

113

Video OSD Output

This setting is not applicable for this product.

Video OSD InputMethod InputLanguage

This setting is not applicable for this product.

Video OSD InputMethod Cyrillic

This setting is not applicable for this product.

Video OSD LoginRequired

This setting is not applicable for this product.

Video Output HDMI [1] Location HorizontalOffset

noTE: Applies only to EX90.
Horizontaloffset and Verticaloffset settings are associated with each video output. These 

settings are used to signal the relative position of the displays that are connected to these 

outputs. The integrated lCD display has Horizontaloffset = 0 and Verticaloffset = 0 (implicit, 

not configurable).
Horizontaloffset = 0 and Verticaloffset = 0 indicates that the display is positioned in center, 

both horizontally and vertically. A negative horizontal offset indicates that the monitor is left of 

center, and a positive horizontal offset indicates that the monitor is right of center. A negative 

vertical offset indicates that the monitor is below center, and a positive vertical offset indicates 

that the monitor is above center. The magnitude of the offset indicates how far the display is 

from center (relative to other displays). 
Example: you have two displays side by side, one in center and one to the left. Then the 

following settings will apply: Horizontaloffset = 0 for the center display, Horizontaloffset = -1 for 

the left display. 
Example: you have two displays, one in center and one below. Then the following settings will 

apply: Verticaloffset = 0 for the center display, Vertical offset = -1 for the lower display. 
The default values for the different outputs are: 
Video output HDmI [1] location: Horizontaloffset = 1, Verticaloffset = 0

Requires user role:

 ADmIn

Value space:

 <-100..100>

Range:

 The value must be between -100 and 100.

Example:

 Video Output HDMI 1 Location HorizontalOffset: 1

Video Output HDMI [1] Location VerticalOffset

noTE: Applies only to EX90.
Horizontaloffset and Verticaloffset settings are associated with each video output. These 

settings are used to signal the relative position of the displays that are connected to these 

outputs. The integrated lCD display has Horizontaloffset = 0 and Verticaloffset = 0 (implicit, 

not configurable).
Horizontaloffset = 0 and Verticaloffset = 0 indicates that the display is positioned in center, 

both horizontally and vertically. A negative horizontal offset indicates that the monitor is left of 

center, and a positive horizontal offset indicates that the monitor is right of center. A negative 

vertical offset indicates that the monitor is below center, and a positive vertical offset indicates 

that the monitor is above center. The magnitude of the offset indicates how far the display is 

from center (relative to other displays).
Example: you have two displays side by side, one in center and one to the left. Then the 

following settings will apply: Horizontaloffset = 0 for the center display, Horizontaloffset = -1 for 

the left display. 
Example: you have two displays, one in center and one below. Then the following settings will 

apply: Verticaloffset = 0 for the center display, Vertical offset = -1 for the lower display. 
The default values for the different outputs are: 
Video output HDmI [1] location: Horizontaloffset = 1, Verticaloffset = 0

Requires user role:

 ADmIn

Value space:

 <-100..100>

Range:

 The value must be between -100 and 100.

Example:

 Video Output HDMI 1 Location Vertical Offset: 0

Содержание EX60







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды