www.cisco.com
30
Cisco IP Video Phone E20
Administrator guide
D14330.12
Administrator guide Cisco IP Video Phone E20, TE4.1 November 2011.
All contents are Copyright © 2010–2011, Cisco Systems, Inc. All rights reserved.
Proxy 1–4
Address
: The
Proxy Address
is the manually configured address
for the outbound proxy. It is possible to use a fully qualified domain
name, or an IP address. The default port is 5060 for TCP and UDP
but another can be provided.
Discovery
: When
Manual
is selected, the manually configured SIP
Proxy address will be used. When Auto is selected, the SIP Proxy
address is obtained using Dynamic Host Configuration Protocol (DHCP).
Authentication 1
Login name
: This is the user name part of the credentials used to
authenticate towards the SIP proxy.
Password
: This is the password part of the credentials used to
authenticate towards the SIP proxy.
Standby
The Standby Control setting determines whether the system should go into
standby mode or not.
Control On
: The system will go into standby mode when the
Standby
Delay
has timed out. Requires the
Standby Delay
to be set to an
appropriate value.
Control Off
: The system will not go into standby.
Delay
: Defines how long (in minutes) the system will wait before it goes
into standby mode. Requires the
Standby Control
to be enabled. Range
1–480
minutes.
System Unit
Bluetooth™
can be set to
On
or
Off
.
Name
: Enter a System Name to define a name of the system unit. The system
name will be displayed when the E20 is acting as an SNMP Agent and towards
a DHCP server. Use a readable name of the device, e.g. Joe’s E20
MenuLanguage
: Specify the language to be used in the menus. Select
between
English
,
Norwegian
,
Swedish
,
German
,
French
,
Korean
,
Italian
,
Dutch
,
Danish
,
Finnish
,
Portuguese
,
Japanese
,
Russian
,
Spanish
,
Spanish Latin
,
Turkish
,
Chinese
Traditional
,
Chinese Simplified
.
HearingImpairedMode
: If this is set to
On
, the device will play a blinking,
orange video whenever there is an incoming call,
Off
is default
Time
Allows you to set the time zone accordingly as well as time format (12h/24h)
and the date format in the usual manner.
Video
LCD
: Lets you adjust the brightness of the screen.
OSD
: (On Screen Display)
InputMethod
InputLanguage
can be Latin or Cyrillic
Cyrillic
can be set to
On
or
Off
. When set to
On
Cyrrilic becomes a part
of the loop when selecting
abc/123
.
BuddyList
can be set to be shown or not.
Selfview
can be set to
On
or
Off
. Selfview is the unit’s outgoing video signal
(what the other side sees of you).
Wallpaper
Specify file name. Wallpaper is the image displayed by the system
when in idle. This may be no wallpaper, i.e. dark (as if unit has been turned off),
the default setting or your own personal wallpaper. If you choose to go for the
latter, you should present your wallpaper to the unit by means of a memory
stick connected to the USB socket of the unit. Your E20 will examine the
memory stick contents and let you choose what to use. Selected contents will
be copied to the E20. Just follow its instructions.
The file formats supported are *.jpg, *.png, *.gif.
HZsensor
: To avoid a flickering image due to the line voltage frequency, you
may select between 50 and 60 Hz, or set it to auto to let the unit decide.
Change password
This allows you to set or change the administrator password on the device. This
is done by entering the password in the password field and pressing the
Save
button. You may cancel the password change by pressing the
Cancel
button.
Restart
Use this to reboot the E20 in a controlled manner.
