![background image](http://html.mh-extra.com/html/cisco/ddr2201-series/ddr2201-series_installation-and-operation-manual_64874028.webp)
Chapter 2 Installing the Residential Gateway
10
4030765 Rev 01
Connecting Your Computer to the Residential
Gateway
You can connect a computer to the residential gateway using one of the following
methods:
Ethernet Connection
Wireless Connection
Note
: These instructions describe a PC connection. You could also connect another
type of device with a wireless interface. See the owner's manual that came with the
device for instructions.
Connecting the Computer with an Ethernet Connection
Complete these steps to connect the computer with an Ethernet connection.
1
Connect the power adapter that came with the residential gateway to the
POWER port on the residential gateway and to an electrical outlet.
2
Power on the residential gateway. After the residential gateway has completed
its startup process, the POWER LED on the front panel of the residential gateway
should be green.
3
Connect the Ethernet cable provided with the residential gateway from any
available Ethernet port (LAN 1 through LAN 4) on the gateway to the Ethernet
port on the computer.
4
Connect the gray cable provided with the residential gateway from the DSL port
on the gateway to a telephone wall jack. See
Connecting the DSL Interface
(on
page 12) for more information.
3-6-2009 Draft
Содержание DDR2201 Series
Страница 1: ...4030765 Rev 01 DDR2201 Series Residential Gateway Installation and Operation Guide 3 6 2009 Draft ...
Страница 2: ...3 6 2009 Draft ...
Страница 32: ...3 6 2009 Draft ...