Cisco DDR2201 Series, Инструкция по установке и эксплуатации

Страница: 17 / 74

3-6-2009 Draft
FCC Compliance
FCC REQUIREMENTS
This equipment complies with Part 68 of FCC Rules and the requirements adopted by the
ACTA.. On the bass unit of this equipment is a label that contains, among other information, a
product identifier in the format US: GEMDL01BDDR2201V1. If requested, this number must be
provided to the telephone company.
The REN is useful to determine the quantity of devices you may connect to your telephone line
and still have those devices ring when your telephone number is called. In most, but not all
areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be
certain of the number of devices you may connect to your line, as determined by the REN, you
should contact your local telephone company to determine the maximum REN for your calling
area.
If your equipment causes harm to the telephone network, the telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will be informed of your
right to file a complaint with the FCC. Your telephone company may make changes in its
facilities, equipment, operations or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an opportunity to maintain
uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact the following address
and phone number for information on obtaining service or repairs:
The telephone company may ask that you disconnect this equipment from the network until the
problem has been corrected or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
xiv 4030765 Rev 01