These properties can also be set using selected steps of the procedure described in
1000v OVA to the VM using vSphere, on page 76
.
Note
Figure 4: Cisco CSR 1000v Advanced Property Configuration Screen
See the tables in
Deploying the Cisco CSR 1000v OVA to the VM using vSphere, on page 76
for the basic Cisco CSR
1000v properties that can be edited in the vSphere vApps GUI.
Step 4
Select the property to be edited and click Edit.
Step 5
Once you have edited the property, click OK to close.
Editing the Custom Properties of Cisco CSR 1000v using vSphere
You can add custom properties to the Cisco CSR 1000v based on Cisco IOS XE CLI commands using the
vSphere GUI. You can add these properties either before or after you boot the Cisco CSR 1000v. If you set
these custom properties after the Cisco CSR 1000v has booted, you will need to reload the router or power-cycle
the VM for the properties settings to take effect.
To edit the vApp options to add custom Cisco CSR 1000v properties, do the following:
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
83
Installing the Cisco CSR 1000v in VMware ESXi Environments
Deploying the Cisco CSR 1000v OVA to the VM using vSphere
