3-42
Cisco Video Surveillance System IP Camera User Guide
OL-14220-02
Chapter 3 Configuring and Managing the IP Camera
Status Windows
System: Cancel upgrade process
An IP camera administrator cancelled a firmware
upgrade that was in process.
System: Invalid upgrade file
You are attempting to upgrade firmware for the IP
camera but are using and invalid firmware file.
System: Reset to factory defaults.
Factory reset procedure performed for the IP
camera.
Unsuccessful login attempt.
A user tried but was unable to log in to the IP
camera.
Web: Invalid login attempt. [id:
User_ID
, ip:
Address
]
Provides information when someone logs in, or
attempts to log in, to the IP camera.
User
is the IP camera user name of the user.
Address
is the IP address of the PC that was used.
Web: User logged in to web UI. [id:
User_ID
, ip:
Address
]
Web: User logged out from web UI. [id:
User_ID
,
ip:
Address
]
Wireless: Link down by AP when receiving
DeAuth.
Wireless IP camera cannot communicate with the
access point.
Wireless: Link down by STA when changing
SSID.
A user is changing the SSID for the wireless IP
camera.
Wireless: Link down when losing BEACON.
Wireless IP camera cannot communicate with the
access point because the access point is shutting
down.
Wireless: Link up.
Wireless IP camera established connection to the
access point.
FTP log messages.
Note
These messages appear if you enable the FTP Log option.
FTP: Error during the connection or timeout.
[host:
Address
]
Provide information when the camera uploads a
video file to the FTP server.
Address
is the IP address of the FTP server.
FTP: File uploading failed. [host:
Address
]
FTP: File uploaded successfully. [host:
Address
]
FTP: Login failed. [host:
Address
]
FTP: No such remote path. [host:
Address
]
FTP: Unknown FTP server. [host:
Address
]
Table 3-25
Syslog and Log Information (continued)
Message
Explanation
