Cisco CISCO7204 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 38

Cisco CISCO7204 Скачать руководство пользователя страница 1

1

Doc. No.

Cisco Systems, Inc.
All rights reserved.

170 West Tasman Drive
San Jose, CA 95134-1706
USA

Cisco Systems, Inc.

Corporate Headquarters

Copyright © 1996

Regulatory Compliance and Safety Information
for the Cisco 7200 Series Routers

Product Numbers: CISCO7206, CISCO7206-DC, CISCO7204, CISCO7204-DC

This publication provides international agency compliance, safety, and statutory information for
wide area network (WAN) interfaces for the Cisco 7200 series routers. This publication also provides
translations for the safety warnings in the Cisco 72xx Installation and Configuration Guide that
shipped with your Cisco 7200 series router.

Use the information in this publication in conjunction with the Cisco 72xx Installation and
Configuration Guide that shipped with your Cisco 7200 series router, and as an addendum to the
Configuration Fundamentals Configuration Guide.

The following sections are included in the publication:

•

General Documentation Information, page 2

•

Cisco 7200 Series Overview, page 3

•

Port Adapters, page 6

— PA-4T Synchronous Serial Port Adapter, page 6

— PA-H and PA-2H High-Speed Serial (HSSI) Port Adapters, page 9

•

Agency Approvals for the Cisco 7200 Series Routers, page 13

•

Translated Safety Warnings, page 14

•

Cisco Connection Online, page 37

78-3419-02

1
2
3
...
»

Содержание CISCO7204







































Отзывы:

Нет отзывов