Cisco CGR 1240, Инструкция по монтажу

Страница: 12 / 26

60
Figure 32 Assemble Bracket Hardware Sets
The instructions for the procedures in this section refer to the mounting plate features shown in Figure 33 on page 60 .
Figure 33 Mounting Bracket Details
Note: The mounting plate must be installed as described in Install the Mounting Plate onto a Pole, page 54 .
To attach the mounting bracket to the mounting plate (refer to Figure 34 on page 61 ):
Required Materials

Mounting bracket and hardware included in the Mounting Bracket Kit, page 51

13-mm box-end socket wrench
1. Assemble four sets of bracket hardware (washer, split lock washer, and bolt) as shown in Assemble Bracket
Hardware, page 59 .
2. Place the mounting bracket against the mounting plate by inserting the bracket quick hang notch over the mounting
plate quick hang stud (
4 ).
Item Description
1 Pivot grooves (4)
2 Quick hang notch
3 Quick hang slots (2)
4 Optional wall-mount holes (4)
300611
1
2
3
300612
1
4
3
2