61
3.
Thread the serrated nut onto the quick mount stud (
4
) and hand tighten (do not overtighten).
4.
Align the pivot grooves (
2
) on the bracket with four of the bracket mount holes (
1
) on the mounting plate. Follow these
guidelines:
—
Each of the four pivot grooves on the bracket must be attached to at least one bracket mount hole on the
mounting plate.
—
The final desired orientation of the mounting plate and router determine which bracket mount holes are used.
—
Mount the router as described in
5.
Insert one bolt assembly (
3
) through one of the pivot grooves (
2
) on the bracket and then through the corresponding
bracket mount hole on the mounting plate.
6.
Repeat Step 5 for the remaining bolt assemblies.
7.
Position the mounting bracket onto the mounting plate as needed before further tightening the bolts.
8.
Use a socket wrench to evenly tighten all four bolts and the serrated nut to finish installing the bracket on the plate.
Use a torque of 6-7 foot-pounds when tightening the bolts and nut.
Figure 34
Mounting Bracket Attached to Mounting Plate
300613
1
2
3
5
4
6
Содержание CGR 1240
Страница 26: ...74 ...
