Cisco CCNA NETWORK SIMULATOR, Руководство пользователя

Страница: 62 / 88

© 2004 Boson Software, Inc. All Rights Reserved.
57
Network Designer - Adding a Device with Drag-n-Drop
Manually Adding Devices.
Note: An Add Device Wizard is also available.
Adding eRouters
The Network Design Topology supports 8 series of routers, 800, 1000, 1600, 1700, 2500,
2600, 3600, and 4500 series. To add a router to the layout area, simply follow the steps below.
1. Left - Click the plus sign next to "Available Routers"
2. After the device type has been selected the option expands to show all available Router
series.
3. Left - Click on the plus sign next to the Router series to reveal all available models.
4. While holding the left mouse button down, Drag and Drop the selected Router to the
desired location in your NetMap Topology physical layout worksheet.
Adding eSwitches
The Network Design Topology supports 2 series of switches the Catalyst 1900, and 2900
series. To add a Switch to the layout area, simply follow the steps below.
1.
Left - Click the plus sign next to "Available Switches"
2. After the type has been selected the option expands to show all available Switch series'.
3. Left - Click on the plus sign next to the Switch series to reveal all available models.
4. While holding the left mouse button down, Drag and Drop the selected Switch to the
desired location in your NetMap Topology physical layout worksheet.
Adding eStations
To add a PC to the layout area, simply follow the steps below.
1. On the left of the screen, click the plus sign next to the Other Devices button.
2. The available Stations (PC’s) will be displayed.
3. Left click the PC you would like to add, Drag and Drop it to the desired location in
your NetMap Topology physical layout worksheet.
Note: In the simulated PC box, type “?” for available commands, and type “help” for an
overview. See the section entitled “Simulated Workstations” for more information.