Cisco Catalyst 9164 Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 60

background image

C H A P T E R

5

Configuring and Deploying the Access Point

This section describes how to connect the AP to a controller. For instructions on how to configure the AP,
see the

Cisco Wireless Controller Configuration Guide

for the relevant release.

•

The Controller Discovery Process, on page 21

•

Deploying the Access Point on the Wireless Network, on page 22

•

Checking the Access Point LEDs, on page 22

The Controller Discovery Process

To support the CW9164I AP, the controller must be running Cisco IOS XE Cupertino 17.9.1 or a later release.
For more information, see the

Cisco Catalyst 9164 Series Access Points Data Sheet

.

Guidelines and Limitations

• It is not possible to edit or query an access point using the controller CLI if the name of the access point

contains a space.

• Make sure that the controller is set to the current time. If the controller is set to a time that has already

occurred, the access point might not join the controller because its certificate may not be valid for that
time.

The AP must discover the controller before it can become an active part of the network. The AP supports the
following controller discovery processes:

• Locally stored controller IP address discovery: If the access point was previously joined to a controller,

the IP addresses of the primary, secondary, and tertiary controllers are stored in the access point's
nonvolatile memory. This process of storing controller IP addresses on an access point for later deployment
is called priming the access point. For more information about priming, see

Performing a Preinstallation

Configuration (Optional), on page 15

.

• DHCP server discovery: This feature uses DHCP Option 43 to provide controller IP addresses to the

access points. Cisco switches support a DHCP server option that is typically used for this capability. For
more information about DHCP Option 43, see

Configuring DHCP Option 43, on page 27

• DNS discovery: The access point can discover controllers through your domain name server (DNS). For

the access point to do so, you must configure your DNS to return controller IP addresses in response to
CISCO-CAPWAP-CONTROLLER.localdomain, where localdomain is the access point domain name.
Configuring the CISCO-CAPWAP-CONTROLLER provides backwards compatibility in an existing

Cisco Catalyst 9164 Series Wi-Fi 6E Access Point Hardware Installation Guide

21

«
...
27
28
29
30
31
...
»

Содержание Catalyst 9164 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 9164 Series

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 140

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 48

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 178

Бренд: iBall Baton Страницы: 61

Бренд: Airlink101 Страницы: 41

Бренд: Ebyte Страницы: 16

Бренд: LevelOne Страницы: 71

Бренд: ALCON Страницы: 47

WAP-1000 WireFree

Бренд: Planet Страницы: 28

Бренд: One Touch Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды